Initializing Developer And Toner - Ricoh V-C3 D081 Field Service Manual

3. Make sure that the toner cartridge is marked "D081/D082" for this machine.
4. Shake the toner cartridge [A] up and down about 10 times. Never squeeze or knead the toner
cartridge (this will make clumps in the toner).
5. Make sure the flat bottom of the cartridge is up.
6. Set the Yellow toner cartridge in the bin [B].
7. Push the Yellow toner cartridge bin to close and lock it.
8. Repeat this procedure for the other three toner cartridge (C, M, K)
• Make sure that the color of each toner cartridge matches the color of the label on the bin door
before you install it.

Initializing Developer and Toner

Before You Begin...
• Follow this procedure in the correct order as described below.
• Do not turn on the machine until you are instructed to do so.
• To prevent damage to the drums during this procedure, make sure that the front door is open before
you switch on the machine.
Main Machine D081/D082
2
77