Ethernet Port Eth0 And Eth1; Ethernet Connector; Connection Of Ethernet Cables; Connection Of Ethernet Connector - Hirschmann OWL 4G Europe User Manual

6.6.3 Ethernet Port ETH0 and ETH1

The panel socket RJ45 is used for this interface. The insulation strength of Ethernet ports from
each other and from the rest of the router (grounding) is 1500 V.
Pin Signal mark
1 TXD+
2 TXD-
3 RXD+
4 —
5 —
6 RXD-
7 —
8 —
The Ethernet cable plugs into the RJ45 connectors labeled as ETH0 and ETH1 (see figure
below).
26
Description
Transmit Data – positive pole
Transmit Data – negative pole
Receive Data – positive pole
—
—
Receive Data – negative pole
—
—
Table 7: Connection of Ethernet connector
Figure 14: Ethernet connector
Figure 15: Connection of Ethernet cables
Data flow direction
Input/Output
Input/Output
Input/Output
Input/Output
UM Installation OWL 4G Europe
Release 01 - 08/2019