Configuring Inter-Vlan Routing; Viewing The Routing Table; Configuring Dynamic Dns - Cisco RV215W Administration Manual

Configuring Networking

Viewing the Routing Table

STEP 4
Viewing the Routing Table

Configuring Dynamic DNS

STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 2—Cisco Confidential
Click Save.

Configuring Inter-VLAN Routing

Check the Inter-VLAN Routing box to enable routing between the separate VLANs
on the .
The routing table contains information about the topology of the network
immediately around it.
To view the routing information on your network, choose Networking > Routing
Table and choose one of the following:
• Show IPv4 Routing Table—The routing table is displayed with the fields
configured in the Networking > Routing page.
• Show IPv6 Routing Table—The routing table is displayed with the fields
configured in the Networking > IPv6 pages.
Dynamic DNS (DDNS) is an Internet service that allows routers with varying public
IP addresses to be located using Internet domain names. To use DDNS, you must
set up an account with a DDNS provider such as DynDNS.com, TZO.com,
3322.org, or noip.com.
The router notifies dynamic DNS servers of changes in the WAN IP address, so
that any public services on your network can be accessed by using the domain
name.
To configure DDNS:
Choose Networking > Dynamic DNS.
From the DDNS Service drop-down menu, choose Disable to disable this service
or choose the DDNS service to use.
2
38