Show L2Vpn Bridge-Domain (Vpls) - Cisco XR 12000 Series Command Reference Manual

Virtual Private LAN Services Commands

show l2vpn bridge-domain (VPLS)

To display information for the bridge ports such as attachment circuits and pseudowires for the specific bridge
domains, use the show l2vpn bridge-domain command in EXEC mode.
show l2vpn bridge-domain [bd-name bridge-domain-name | brief | detail | group bridge-domain-group-name
| interface type interface-path-id] neighbor IP-address [pw-id value | summary]
Syntax Description
bd-name
bridge-domain-name
brief
detail
group bridge-domain-
group-name
interface
type
interface-path-id
neighbor IP-address
pw-id value
summary
Command Default
None
Command Modes
EXEC mode
OL-28460-01
(Optional) Displays the bridges by the bridge ID. The bridge-domain-name
argument is used to name a bridge domain.
(Optional) Displays brief information about the bridges.
(Optional) Displays the output for the Layer 2 VPN (L2VPN) to indicate whether
or not the MAC withdrawal feature is enabled and the number of MAC
withdrawal messages that are sent or received from the pseudowire.
(Optional) Displays filter information on the bridge-domain group name. The
bridge-domain-group-name argument is used to name the bridge domain group.
(Optional) Displays the filter information for the interface on the bridge domain.
Interface type. For more information, use the question mark (?) online help
function.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
(Optional) Displays only the bridge domain that contains the pseudowires to
match the filter for the neighbor. The IP-address argument is used to configure
IP address of the neighbor.
(Optional) Displays the filter for the pseudowire ID. The range is from 1 to
4294967295.
(Optional) Displays the summary information for the bridge domain.
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
show l2vpn bridge-domain (VPLS)
193