Show Tech-Support L2Vpn - Cisco XR 12000 Reference

Tech-Support Commands

show tech-support l2vpn

To automatically run show commands that display information specific to Layer 2 Virtual Private Network
(L2VPN) debugging, use the show tech-support l2vpn command in EXEC mode.
show tech-support l2vpn {file send-to [background] [compressed| uncompressed]| terminal [page] [rack]}
Syntax Description
file
send-to
background
compressed
uncompressed
terminal
page
rack
OL-30353-01
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Specifies that the command output is displayed on the terminal.
(Optional) Specifies that the command output is displayed one page at a time. Use
the return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl+C keys to stop the command output.
(Optional) Displays the list of racks.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
show tech-support l2vpn
233