Ipv6 Bgp Configuration Commands; Aggregate (Ipv6 Address Family View) - H3C S5820X Series Command Reference Manual

11

IPv6 BGP Configuration Commands

The term router in this document refers to both routers and Layer-3 switches.
For more information about route policy configuration commands in this document, see Route
Policy Configuration Commands in the Layer 3 - IP Routing Command Reference.
IPv6 BGP Configuration Commands

aggregate (IPv6 address family view)

Syntax
aggregate ipv6-address
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ipv6-address prefix-length
View
IPv6 address family view
Default Level
2 System level
Parameters
ipv6-address: Summary address.
prefix-length: Length of summary route mask, in the range 0 to 128.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the routing
policy. The routing policy name is a string of 1 to 19 characters.
detail-suppressed: Only advertises the summary route.
suppress-policy route-policy-name: Suppresses specific routes defined in the routing policy. The
routing policy name is a string of 1 to 19 characters.
origin-policy route-policy-name: References the routing policy to specify routes for summarization.
The routing policy name is a string of 1 to 19 characters.
The keywords of the command are described as follows:
prefix-length [ as-set
11-1
| attribute-policy route-policy-name |