Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Configuring a Bridged NetFlow on a VLAN
You can apply a flow monitor and an optional sampler to a VLAN.
SUMMARY STEPS
1. configure terminal
2. vlan [configuration] vlan-id
3. interface {vlan} vlan-id
4. ip flow monitor monitor name [sampler sampler name] {input |output}
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2
vlan [configuration] vlan-id
Example:
Switch(config)# vlan configuration 30
Switch(config-vlan-config)#
Step 3 interface {vlan} vlan-id
Example:
Switch(config)# interface vlan 30
Step 4
ip flow monitor monitor name [sampler sampler name] {input
|output}
Example:
Switch(config-vlan-config)# ip flow monitor
MonitorTest input
Step 5 copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

How to Configure NetFlow Lite
Purpose
Enters the global configuration mode.
Enters VLAN or VLAN configuration mode.
Specifies the SVI for the configuration.
Associates a flow monitor and an optional sampler
to the VLAN for input or output packets.
(Optional) Saves your entries in the configuration
file.
531