Configuring The Forwarding-Delay Time For A Vlan - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Example:
Switch> enable
Step 2
spanning-tree vlan vlan-id hello-time
seconds
Example:
Switch(config)# spanning-tree vlan
20-24 hello-time 3
Step 3
end
Example:
Switch(config-if)# end

Configuring the Forwarding-Delay Time for a VLAN

This procedure is optional.
SUMMARY STEPS
1. enable
2. configure terminal
3. spanning-tree vlan vlan-id forward-time seconds
4. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Purpose
Configures the hello time of a VLAN. The hello time is the time interval
between configuration messages generated and sent by the root switch.
These messages mean that the switch is alive.
• For vlan-id, you can specify a single VLAN identified by VLAN ID
number, a range of VLANs separated by a hyphen, or a series of
VLANs separated by a comma. The range is 1 to 4094.
• For seconds, the range is 1 to 10; the default is 2.
Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Spanning-Tree Features
235