Limiting Tftp Servers Used Through Snmp - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
end
Example:
Switch(config)# end
Step 6 show running-config
Example:
Switch# show running-config
Step 7 copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
SNMP Agent Functions, on page 449

Limiting TFTP Servers Used Through SNMP

Follow these steps to limit the TFTP servers used for saving and loading configuration files through SNMP
to the servers specified in an access list.
SUMMARY STEPS
1. enable
2. configure terminal
3. snmp-server tftp-server-list access-list-number
4. access-list access-list-number {deny | permit} source [source-wildcard]
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure SNMP
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration
file.
465