Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

SUMMARY STEPS
1. configure terminal
2. mls qos srr-queue input buffers percentage1 percentage2
3. end
4. Use one of the following:
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2
mls qos srr-queue input buffers percentage1
percentage2
Example:
Switch(config)# mls qos srr-queue input
buffers 60 40
Step 3
end
Example:
Switch(config)# end
Step 4 Use one of the following:
• show mls qos interface buffer
• show mls qos input-queue
Example:
Switch# show mls qos interface buffer
or
Switch# show mls qos input-queue
• show mls qos interface buffer
• show mls qos input-queue

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Purpose
Enters the global configuration mode.
Allocates the buffers between the ingress queues
By default 90 percent of the buffers are allocated to queue 1,
and 10 percent of the buffers are allocated to queue 2.
For percentage1 percentage2, the range is 0 to 100. Separate
each value with a space.
You should allocate the buffers so that the queues can handle
any incoming bursty traffic.
Returns to privileged EXEC mode.
Verifies your entries.
How to Configure QoS
615