Configuring Dscp Maps - Cisco Catalyst 2960 series Configuration Manual

How to Configure QoS
Command or Action
Step 10
end
Example:
Switch(configure-if)# end
Step 11 show mls qos aggregate-policer
[aggregate-policer-name]
Example:
Switch# show mls qos aggregate-policer
transmit1
Step 12
copy running-config startup-config
Example:
Switch# copy-running-config startup-config
Related Topics
Policing and Marking Overview, on page 550
Examples: Classifying, Policing, and Marking Traffic by Using Aggregate Policers, on page 637

Configuring DSCP Maps

Related Topics
Mapping Tables Overview, on page 552
Configuring the CoS-to-DSCP Map
You use the CoS-to-DSCP map to map CoS values in incoming packets to a DSCP value that QoS uses
internally to represent the priority of the traffic.
Beginning in privileged EXEC mode, follow these steps to modify the CoS-to-DSCP map. This procedure is
optional.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
604
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.