How To Attach An Ipv6 Neighbor Discovery Multicast Suppress Policy On An Interface - Cisco Catalyst 2960 series Configuration Manual

How to Attach an IPv6 Neighbor Discovery Multicast Suppress Policy on a Device
SUMMARY STEPS
1. enable
2. configure terminal
3. ipv6 nd suppress policy policy-name
4. mode dad-proxy
5. mode full-proxy
6. mode mc-proxy
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2 configure terminal
Step 3 ipv6 nd suppress policy policy-name
Step 4 mode dad-proxy
Step 5
mode full-proxy
Step 6
mode mc-proxy
Related Topics
Information about First Hop Security in IPv6, on page 678

How to Attach an IPv6 Neighbor Discovery Multicast Suppress Policy on an Interface

To attach an IPv6 Neighbor Discovery Multicast Suppress policy on an interface, complete the following
steps:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
692
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Enters the global configuration mode.
Defines the Neighbor Discovery suppress policy name and enters
Neighbor Discovery suppress policy configuration mode.
Enables Neighbor Discovery suppress in IPv6 DAD proxy mode.
Enables Neighbor Discovery suppress to proxy multicast and unicast
Neighbor Solicitation messages.
Enables Neighbor Discovery suppress to proxy multicast Neighbor
Solicitation messages.