Accounting Attribute-Value Pairs - Cisco Catalyst 2960 series Configuration Manual

Table 101: SNMP End-User Data Objects
SessionId
UserId
IpAddr
IdleTime
Disconnect
CallId
The table below describes the AAA summary information provided by the AAA session MIB feature using
SNMP on a per-system basis.
Table 102: SNMP AAA Session Summary
ActiveTableEntries
ActiveTableHighWaterMark
TotalSessions
DisconnectedSessions

Accounting Attribute-Value Pairs

The network access server monitors the accounting functions defined in either TACACS+ AV pairs or RADIUS
attributes, depending on which security method is implemented.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Information About Configuring Accounting
The session identification used by the AAA
Accounting protocol (same value as reported by
RADIUS attribute 44 (Acct-Session-ID)).
The user login ID or zero-length string if a login is
unavailable.
The IP address of the session or 0.0.0.0 if an IP
address is not applicable or unavailable.
The elapsed time in seconds that the session has been
idle.
The session termination object used to disconnect the
given client.
The entry index corresponding to this accounting
session that the Call Tracker record stored.
Number of sessions currently active.
Maximum number of sessions present at once since
last system reinstallation.
Total number of sessions since last system
reinstallation.
Total number of sessions that have been disconnected
using since last system reinstallation.
1017