Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 snmp-server engineID {local
engineid-string | remote ip-address
[udp-port port-number] engineid-string}
Example:
Switch(config)# snmp-server
engineID local 1234
Step 4
snmp-server group group-name {v1 |
v2c | v3 {auth | noauth | priv}} [read
readview] [write writeview] [notify
notifyview] [access access-list]
Example:
Switch(config)# snmp-server group
public v2c access lmnop
Purpose
Enters the global configuration mode.
Configures a name for either the local or remote copy of SNMP.
• The engineid-string is a 24-character ID string with the name of the copy
of SNMP. You need not specify the entire 24-character engine ID if it has
trailing zeros. Specify only the portion of the engine ID up to the point
where only zeros remain in the value. The Step Example configures an
engine ID of 123400000000000000000000.
• If you select remote, specify the ip-address of the device that contains the
remote copy of SNMP and the optional User Datagram Protocol (UDP)
port on the remote device. The default is 162.
Configures a new SNMP group on the remote device.
For group-name, specify the name of the group.
Specify one of the following security models:
• v1 is the least secure of the possible security models.
• v2c is the second least secure model. It allows transmission of informs and
integers twice the normal width.
• v3, the most secure, requires you to select one of the following
authentication levels:
auth—Enables the Message Digest 5 (MD5) and the Secure Hash Algorithm
(SHA) packet authentication.
noauth—Enables the noAuthNoPriv security level. This is the default if
no keyword is specified.
priv—Enables Data Encryption Standard (DES) packet encryption (also
called privacy).
(Optional) Enter read readview with a string (not to exceed 64 characters) that
is the name of the view in which you can only view the contents of the agent.
(Optional) Enter write writeview with a string (not to exceed 64 characters) that
is the name of the view in which you enter data and configure the contents of the
agent.
(Optional) Enter notify notifyview with a string (not to exceed 64 characters)
that is the name of the view in which you specify a notify, inform, or trap.
(Optional) Enter access access-list with a string (not to exceed 64 characters)
that is the name of the access list.

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

How to Configure SNMP
457