Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Cause Code
4
9
10
11
12
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Value
CLID-Authentication-Failure
No-Modem-Available
No-Carrier
Lost-Carrier
No-Detected-Result-Codes
User-Ends-Session
Idle-Timeout
Exit-Telnet-Session
No-Remote-IP-Addr
Exit-Raw-TCP
Password-Fail
Raw-TCP-Disabled
Control-C-Detected
EXEC-Process-Destroyed
Close-Virtual-Connection
End-Virtual-Connection
Exit-Rlogin
Invalid-Rlogin-Option
Insufficient-Resources

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Information about RADIUS
Description
Failure to authenticate number of the
calling-party.
A modem in not available to connect the
call.
No carrier detected.
Codes 10, 11, and 12 can be sent
Note
if there is a disconnection during
initial modem connection.
Loss of carrier.
Failure to detect modem result codes.
User terminates a session.
Codes 20, 22, 23, 24, 25, 26, 27,
Note
and 28 apply to EXEC sessions.
Timeout waiting for user input.
Codes 21, 100, 101, 102, and 120 apply to
all session types.
Disconnect due to exiting Telnet session.
Could not switch to SLIP/PPP; the remote
end has no IP address.
Disconnect due to exiting raw TCP.
Bad passwords.
Raw TCP disabled.
Control-C detected.
EXEC process destroyed.
User closes a virtual connection.
Virtual connected has ended.
User exists Rlogin.
Invalid Rlogin option selected.
Insufficient resources.
919