Examples - Cisco Catalyst 2960 series Configuration Manual

DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 interface interface-id
Example:
Switch(config)# interface gi1/0/1
Step 4 spanning-tree mst simulate pvst
Example:
Switch(config-if)# spanning-tree mst simulate
pvst
Step 5 end
Example:
Switch(config)# end
Step 6
show spanning-tree summary
Example:
Switch# show spanning-tree summary

Examples

Examples: PVST+ Simulation
This example shows how to prevent the switch from automatically interoperating with a connecting switch
that is running Rapid PVST+:
Switch# configure terminal
Switch(config)# no spanning-tree mst simulate pvst global
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Selects a port to configure.
Enables PVST+ simulation on the specified interface.
To prevent a specified interface from automatically
interoperating with a connecting switch that is not running
MST, enter the spanning-tree mst simulate pvst disable
command.
Returns to privileged EXEC mode.
Verifies the configuration.
Examples
281