Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Model Level
SNMPv3 noAuthNoPriv
SNMPv3 authNoPriv
SNMPv3 authPriv
You must configure the SNMP agent to use the SNMP version supported by the management station. Because
an agent can communicate with multiple managers, you can configure the software to support communications
using SNMPv1, SNMPv2C, or SNMPv3.

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Authentication Encryption
Username No
Message Digest 5 No
(MD5) or Secure
Hash Algorithm
(SHA)
MD5 or SHA Data Encryption
Standard (DES) or
Advanced
Encryption Standard
(AES)
Prerequisites for SNMP
Result
Uses a username
match for
authentication.
Provides
authentication based
on the HMAC-MD5
or HMAC-SHA
algorithms.
Provides
authentication based
on the HMAC-MD5
or HMAC-SHA
algorithms.
Allows specifying
the User-based
Security Model
(USM) with these
encryption
algorithms:
• DES 56-bit
encryption in
addition to
authentication
based on the
CBC-DES
(DES-56)
standard.
• 3DES 168-bit
encryption
• AES 128-bit,
192-bit, or
256-bit
encryption
447