Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Budgeting Power to All PoE ports
SUMMARY STEPS
1. enable
2. configure terminal
3. no cdp run
4. power inline consumption default wattage
5. end
6. show power inline consumption default
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
no cdp run
Example:
Switch(config)# no cdp run
Step 4 power inline consumption default wattage
Example:
Switch(config)# power inline consumption default
5000
Step 5
end
Example:
Switch(config)# end
Step 6
show power inline consumption default
Example:
Switch# show power inline consumption default

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters global configuration mode.
(Optional) Disables CDP.
Configures the power consumption of powered devices
connected to each PoE port.
The range for each device is 4000 to 30000 mW (PoE+).
The default is 30000 mW.
Note
Returns to privileged EXEC mode.
Displays the power consumption status.
How to Configure PoE
95