How To Configure Accounting - Cisco Catalyst 2960 series Configuration Manual

How to Configure Accounting

How to Configure Accounting
Configuring AAA Accounting Using Named Method Lists
To configure AAA Accounting using named method lists, perform the following steps:
System accounting does not use named method lists. For system accounting, define only the default method
Note
list.
SUMMARY STEPS
1. enable
2. configure terminal
3. aaa accounting {system | network | exec | connection | commands level} {default | list-name} {start-stop
| stop-only | none} [method1 [method2...]]
4. Do one of the following:
5. Do one of the following:
6. Device(config-line)# end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1018
• line [aux | console | tty | vty] line-number [ending-line-number]
• interface interface-type interface-number
• accounting {arap | commands level | connection | exec} {default | list-name}
• ppp accounting{default | list-name}
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.