Enabling Or Disabling Igmp Snooping On A Vlan Interface - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Default IGMP Snooping Configuration, on page 122

Enabling or Disabling IGMP Snooping on a VLAN Interface

Follow these steps to enable IGMP snooping on a VLAN interface:
SUMMARY STEPS
1. enable
2. configure terminal
3. ip igmp snooping vlan vlan-id
4. end
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
ip igmp snooping vlan vlan-id
Example:
Switch(config)# ip igmp snooping vlan 7
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Enters the global configuration mode.
Enables IGMP snooping on the VLAN interface. The VLAN ID
range is 1 to 1001 and 1006 to 4094.
IGMP snooping must be globally enabled before you can enable
VLAN snooping.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure IGMP Snooping and MVR
Purpose
(Optional) Saves your entries in the configuration file.
129