Configuring The Usb Inactivity Timeout - Cisco Catalyst 2960 series Configuration Manual

How to Configure Interface Characteristics
Command or Action
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 line console 0
Example:
Switch(config)# line console 0
Step 4 media-type rj45
Example:
Switch(config-line)# media-type rj45
Step 5
end
Example:
Switch(config)# end
Step 6 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring the USB Inactivity Timeout

The configurable inactivity timeout reactivates the RJ-45 console port if the USB console port is activated
but no input activity occurs on it for a specified time period. When the USB console port is deactivated due
to a timeout, you can restore its operation by disconnecting and reconnecting the USB cable.
Note The configured inactivity timeout applies to all switches in a stack. However, a timeout on one switch
does not cause a timeout on other switches in the stack.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
36
Purpose
Enters the global configuration mode.
Configures the console and enters line configuration mode.
Configures the console media type to be only RJ-45 port. If
you do not enter this command and both types are connected,
the USB port is used by default.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.