Changing The Default Privilege Level For Lines - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
end
Example:
Switch(config)# end
Step 6 copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Related Topics
Privilege Levels, on page 757
Example: Setting the Privilege Level for a Command, on page 772

Changing the Default Privilege Level for Lines

Follow these steps to change the default privilege level for the specified line:
SUMMARY STEPS
1. enable
2. configure terminal
3. line vty line
4. privilege level level
5. end
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Purpose
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Control Switch Access with Passwords and Privilege Levels
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
769