Configuring Lldp Characteristics - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
lldp transmit
Example:
Switch(config-if)# lldp transmit
Step 6 lldp receive
Example:
Switch(config-if)# lldp receive
Step 7 end
Example:
Switch(config-if)# end
Step 8
show lldp
Example:
Switch# show lldp
Step 9 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring LLDP Characteristics

You can configure the frequency of LLDP updates, the amount of time to hold the information before discarding
it, and the initialization delay time. You can also select the LLDP and LLDP-MED TLVs to send and receive.
Steps 2 through 5 are optional and can be performed in any order.
Note
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure LLDP, LLDP-MED, and Wired Location Service
Purpose
Enables the interface to send LLDP packets.
Enables the interface to receive LLDP packets.
Returns to privileged EXEC mode.
Verifies the configuration.
(Optional) Saves your entries in the configuration file.
63