Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure IGMP Snooping and MVR
Command or Action
Step 5
ip igmp snooping querier query-interval
interval-count
Example:
Switch(config)# ip igmp snooping querier
query-interval 30
Step 6 ip igmp snooping querier tcn query [count count |
interval interval]
Example:
Switch(config)# ip igmp snooping querier tcn
query interval 20
Step 7 ip igmp snooping querier timer expiry timeout
Example:
Switch(config)# ip igmp snooping querier timer
expiry 180
Step 8 ip igmp snooping querier version version
Example:
Switch(config)# ip igmp snooping querier
version 2
Step 9 end
Example:
Switch(config)# end
Step 10 show ip igmp snooping vlan vlan-id
Example:
Switch# show ip igmp snooping vlan 30
Step 11
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

144
Purpose
(Optional) Sets the interval between IGMP queriers. The
range is 1 to 18000 seconds.
(Optional) Sets the time between Topology Change
Notification (TCN) queries. The count range is 1 to 10. The
interval range is 1 to 255 seconds.
(Optional) Sets the length of time until the IGMP querier
expires. The range is 60 to 300 seconds.
(Optional) Selects the IGMP version number that the querier
feature uses. Select 1 or 2.
Returns to privileged EXEC mode.
(Optional) Verifies that the IGMP snooping querier is enabled
on the VLAN interface. The VLAN ID range is 1 to 1001
and 1006 to 4094.
(Optional) Saves your entries in the configuration file.