Effects Of Adding A Provisioned Switch To A Switch Stack - Cisco Catalyst 2960 series Configuration Manual

file ensures that the switch stack can reload and can use the saved information whether or not the provisioned
switch is part of the switch stack.

Effects of Adding a Provisioned Switch to a Switch Stack

When you add a provisioned Switch to the switch stack, the stack applies either the provisioned configuration
or the default configuration. This table lists the events that occur when the switch stack compares the provisioned
configuration with the provisioned switch.
Table 81: Results of Comparing the Provisioned Configuration with the Provisioned Switch
Scenario
The stack member numbers and the
Switch types match.
The stack member numbers match
but the Switch types do not match.
The stack member number is not
found in the provisioned
configuration.
The stack member number of the
provisioned switch is not found in
the provisioned configuration.
1 If the stack member number of
the provisioned switch matches
the stack member number in the
provisioned configuration on
the stack, and
2 If the Switch type of the
provisioned switch matches the
Switch type in the provisioned
configuration on the stack.
1 If the stack member number of
the provisioned switch matches
the stack member number in the
provisioned configuration on
the stack, but
2 The Switch type of the
provisioned switch does not
match the Switch type in the
provisioned configuration on
the stack.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Information About Switch Stacks
Result
The switch stack applies the
provisioned configuration to the
provisioned switch and adds it to
the stack.
The switch stack applies the default
configuration to the provisioned
switch and adds it to the stack.
The provisioned configuration is
changed to reflect the new
information.
The switch stack applies the default
configuration to the provisioned
switch and adds it to the stack.
The provisioned configuration is
changed to reflect the new
information.
The switch stack applies the default
configuration to the provisioned
switch and adds it to the stack.
727