Configuring Tacacs+ Login Authentication - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 6
server ip-address
Example:
Switch(config)# server 10.1.2.3
Step 7 end
Example:
Switch(config)# end
Step 8 show running-config
Example:
Switch# show running-config
Step 9
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring TACACS+ Login Authentication

Follow these steps to configure TACACS+ login authentication:
Before You Begin
To configure AAA authentication, you define a named list of authentication methods and then apply that list
to various ports.
To secure the switch for HTTP access by using AAA methods, you must configure the switch with the ip
Note
http authentication aaa global configuration command. Configuring AAA authentication does not secure
the switch for HTTP access by using AAA methods.
For more information about the ip http authentication command, see the Cisco IOS Security Command
Reference, Release 12.4.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
(Optional) Associates a particular TACACS+ server with the
defined server group. Repeat this step for each TACACS+ server
in the AAA server group.
Each server in the group must be previously defined in Step 3.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
How to Configure TACACS+
885