Configuration Examples For Ipv6 First Hop Security - Cisco Catalyst 2960 series Configuration Manual

Configuration Examples for IPv6 First Hop Security

Configuration Examples for IPv6 First Hop Security
Examples: How to attach an IPv6 Source Guard Policy to a Layer 2 EtherChannel Interface
The following example shows how to attach an IPv6 Source Guard Policy to a Layer 2 EtherChannel Interface:
Switch# configure terminal
Switch(config)# ipv6 source-guard policy POL
Switch(config-sisf-sourceguard) # validate address
switch(config-sisf-sourceguard)# exit
Switch(config)# interface Po4
Switch(config)# ipv6 snooping
Switch(config-if)# ipv6 source-guard attach-policy POL
Switch(config-if)# exit
switch(config)#
Related Topics
How to attach an IPv6 Source Guard Policy to a Layer 2 EtherChannel Interface, on page 707
Examples: How to attach an IPv6 Prefix Guard Policy to a Layer 2 EtherChannel Interface
The following example shows how to attach an IPv6 Prefix Guard Policy to a Layer 2 EtherChannel Interface:
Switch# configure terminal
Switch(config)# ipv6 source-guard policy POL
Switch (config-sisf-sourceguard)# no validate address
Switch((config-sisf-sourceguard)# validate prefix
Switch(config)# interface Po4
Switch(config-if)# ipv6 snooping
Switch(config-if)# ipv6 source-guard attach-policy POL
Related Topics
How to attach an IPv6 Prefix Guard Policy to a Layer 2 EtherChannel Interface, on page 711
Additional References
Related Documents
Related Topic
Implementing IPv6 Addressing and Basic Connectivity
IPv6 network management and security topics
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
712
Document Title
http://www.cisco.com/en/US/docs/
ios-xml/ios/ipv6/configuration/
15-0sy/ip6-addrg-bsc-con.html
IPv6 Configuration Library, Cisco
IOS XE Release 3SE (Catalyst
3850 Switches)
http://www.cisco.com/en/US/docs/
ios-xml/ios/ipv6/config_library/
xe-3se/3850/
ipv6-xe-3se-3850-library.html