Default Snmp Configuration - Cisco Catalyst 2960 series Configuration Manual

Table 48: ifIndex Values
Interface Type
5
SVI
EtherChannel
Tunnel
Physical (such as Gigabit Ethernet or SFP
port numbers
Null
Loopback and Tunnel
5 SVI = switch virtual interface
6 SFP = small form-factor pluggable

Default SNMP Configuration

Feature
SNMP agent
SNMP trap receiver
SNMP traps
SNMP version
SNMPv3 authentication
SNMP notification type
7
This is the default when the switch starts and the startup configuration does not have any
SNMP Configuration Guidelines
If the switch starts and the switch startup configuration has at least one snmp-server global configuration
command, the SNMP agent is enabled.
An SNMP group is a table that maps SNMP users to SNMP views. An SNMP user is a member of an SNMP
group. An SNMP host is the recipient of an SNMP trap operation. An SNMP engine ID is a name for the local
or remote SNMP engine.
When configuring SNMP, follow these guidelines:
• When configuring an SNMP group, do not specify a notify view. The snmp-server host global
configuration command auto-generates a notify view for the user and then adds it to the group associated
with that user. Modifying the group's notify view affects all users associated with that group.
6
Default Setting
Disabled
None configured.
None enabled except the trap for TCP connections (tty).
If no version keyword is present, the default is Version 1.
If no keyword is entered, the default is the noauth (noAuthNoPriv) security
level.
If no type is specified, all notifications are sent.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
-module interfaces) based on type and
7
.
snmp-server
global configuration commands.
Information About SNMP
ifIndex Range
1–4999
5001–5048
5078–5142
10000–14500
14501
24567+
451