Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure PoE
SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. power inline police [action{log | errdisable}]
5. exit
6. Use one of the following:
7. exit
8. Use one of the following:
9. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
interface interface-id
Example:
Switch(config)# interface
gigabitethernet2/0/1
Step 4 power inline police [action{log | errdisable}]
Example:
Switch(config-if)# power inline police

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

98
• errdisable detect cause inline-power
• errdisable recovery cause inline-power
• errdisable recovery interval interval
• show power inline police
• show errdisable recovery
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Enters global configuration mode.
Specifies the physical port to be configured, and enter interface
configuration mode.
If the real-time power consumption exceeds the maximum power
allocation on the port, configures the switch to take one of these
actions:
• power inline police—Shuts down the PoE port, turns off power
to it, and puts it in the error-disabled state.