Configuring The Device Priority Of A Vlan - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 6 end
Example:
Switch(config-if)# end
The show spanning-tree interface interface-id privileged EXEC command displays information only for
ports that are in a link-up operative state. Otherwise, you can use the show running-config privileged EXEC
command to confirm the configuration.
Related Topics
Port Priority Versus Path Cost, on page 215

Configuring the Device Priority of a VLAN

You can configure the switch priority and make it more likely that a standalone switch or a switch in the stack
will be chosen as the root switch.
Exercise care when using this command. For most situations, we recommend that you use the spanning-tree
Note
vlan vlan-id root primary and the spanning-tree vlan vlan-id root secondary global configuration
commands to modify the switch priority.
This procedure is optional.
SUMMARY STEPS
1. enable
2. configure terminal
3. spanning-tree vlan vlan-id priority priority
4. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Purpose
Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Spanning-Tree Features
233