Assigning A Stack Member Number - Cisco Catalyst 2960 series Configuration Manual

Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs Also See for Catalyst 2960 series:
Table of Contents

Advertisement

Command or Action
Step 4
end
Example:
Switch(config)# end
Step 5
copy running-config
startup-config
Example:
Switch# copy running-config
startup-config
What to Do Next
Use the no stack-mac persistent timer global configuration command to disable the persistent MAC address
feature.

Assigning a Stack Member Number

This optional task is available only from the active switchstack master.
Follow these steps to assign a member number to a stack member:
SUMMARY STEPS
1. enable
2. configure terminal
3. switch current-stack-member-number renumber new-stack-member-number
4. end
5. reload slot stack-member-number
6. show switch
7. copy running-config startup-config
Purpose
If you enter the no stack-mac persistent timer command after a new active
Note
switchstack master takes over, before the time expires, the switch stack
moves to the current active switchstack master MAC address.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure a Switch Stack
735

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents