How to Configure PoE
Command or Action
Step 7
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Budgeting Power to a Specific PoE Port
SUMMARY STEPS
1. enable
2. configure terminal
3. no cdp run
4. interface interface-id
5. power inline consumption wattage
6. end
7. show power inline consumption
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
no cdp run
Example:
Switch(config)# no cdp run
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
96
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters global configuration mode.
(Optional) Disables CDP.