Configuring The Egress Expedite Queue - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 6
copy running-config startup-config
Example:
Switch# copy-running-config
startup-config
Related Topics
Queueing and Scheduling on Egress Queues
Examples: Configuring Egress Queue Characteristics, on page 640
SRR Shaping and Sharing, on page 555

Configuring the Egress Expedite Queue

You can ensure that certain packets have priority over all others by queuing them in the egress expedite queue.
SRR services this queue until it is empty before servicing the other queues.
Beginning in privileged EXEC mode, follow these steps to enable the egress expedite queue. This procedure
is optional.
SUMMARY STEPS
1. configure terminal
2. mls qos
3. interface interface-id
4. priority-queue out
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Purpose
(Optional) Saves your entries in the configuration file.
To return to the default setting, use the no srr-queue bandwidth
share interface configuration command.
Purpose
Enters global configuration mode.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure QoS
627