Tacacs Accounting Av Pairs - Cisco Catalyst 2960 series Configuration Manual

Information About TACACS+
Attribute Description
wins-servers= Identifies a
Windows
NT server
that can be
requested by
Microsoft
PPP clients
from the
network
access server
during IPCP
negotiation.
To be used
with
service=ppp
and
protocol=ip.
The IP
address
identifying
each
Windows
NT server is
entered in
dotted
decimal
format.
zonelist=x A numeric
zonelist
value. Used
with
service=arap.
Specifies an
AppleTalk
zonelist for
ARA (for
example,
zonelist=5).
See Configuring TACACS+. module for the documents used to configure TACACS+, and TACACS+
authentication and authorization.

TACACS Accounting AV Pairs

The following table lists and describes the supported TACACS+ accounting AV pairs and specifies the Cisco
IOS release in which they are implemented.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
816
11.0 11.1
no no
yes yes
11.2 11.3
no yes
yes yes
12.0 12.1
yes yes
yes yes
12.2
yes
yes