Verifying The Enhanced Test Command Configuration - Cisco Catalyst 2960 series Configuration Manual

DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
aaa user profile profile-name
Example:
Device(config)# aaa user profile profilename1
Step 4 aaa attribute {dnis | clid}
Example:
Device# configure terminal
Step 5
exit
Step 6 test aaa group {group-name | radius} username
password new-code [profile profile-name]
Example:
test aaa group
Device#
profile
profilename1

Verifying the Enhanced Test Command Configuration

To verify the Enhanced Test Command configuration, use the following commands in privileged EXEC mode:
Command
Device#
Devie#
radius secret new-code
debug radius
more system:running-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Creates a user profile.
Adds DNIS or CLID attribute values to the user profile and
enters AAA-user configuration mode.
Exit Global Configuration mode.
Associates a DNIS or CLID named user profile with the
record sent to the RADIUS server.
Note The profile-name must match the profile-name
specified in the aaa user profile command.
Purpose
Displays information associated with RADIUS.
Displays the contents of the current running
configuration file. (Note that the more
system:running-config command has replaced the
show running-config command.)
How to Configure RADIUS
939