Configuration Examples for Configuring EEE
Configuration Examples for Configuring EEE
This example shows how to enable EEE for an interface:
Switch# configure terminal
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# power efficient-ethernet auto
This example shows how to disable EEE for an interface:
Switch# configure terminal
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# no power efficient-ethernet auto
Additional References
Error Message Decoder
Description
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
MIBs
MIB
All supported MIBs for this release.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
110
Link
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
MIBs Link
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs