Configuring The Switch For Vendor-Proprietary Radius Server Communication - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 6
copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Configuring the Switch for Vendor-Proprietary RADIUS Server Communication

Follow these steps to configure the switch to use vendor-proprietary RADIUS server communication:
SUMMARY STEPS
1. enable
2. configure terminal
3. radius-server host {hostname | ip-address} non-standard
4. radius-server key string
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 radius-server host {hostname | ip-address}
non-standard
Example:
Switch(config)# radius-server host
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Enters the global configuration mode.
Specifies the IP address or hostname of the remote RADIUS server
host and identifies that it is using a vendor-proprietary
implementation of RADIUS.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure RADIUS
937