Configuring Radius System Accounting - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 3
aaa accounting {system | network | exec | connection |
commands level} {default | list-name} {start-stop |
stop-only | none} [method1 [method2...]]
Example:
Device(config)# aaa accounting system default
start-stop
Step 4 Do one of the following:
• line [aux | console | tty | vty] line-number
[ending-line-number]
• interface interface-type interface-number
Example:
Device(config)# line aux line1
Step 5 Do one of the following:
• accounting {arap | commands level | connection |
exec} {default | list-name}
• ppp accounting{default | list-name}
Example:
Device(config-line)# accounting arap default
Step 6 Device(config-line)# end
Example:
Device(config-line)# end

Configuring RADIUS System Accounting

Perform this task to configure RADIUS system accounting on the global RADIUS server:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Accounting
Purpose
Creates an accounting method list and enables accounting.
The argument list-name is a character string used to name
the created list.
Enters the line configuration mode for the lines to which
the accounting method list is applied.
or
Enters the interface configuration mode for the interfaces
to which the accounting method list is applied.
Applies the accounting method list to a line or set of lines.
or
Applies the accounting method list to an interface or set
of interfaces.
(Optional) Exits line configuration mode and returns to
global configuration mode.
1019