Monitoring Eee - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 2
interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/1
Step 3 power efficient-ethernet auto
Example:
Switch(config-if)# power efficient-ethernet auto
Step 4 no power efficient-ethernet auto
Example:
Switch(config-if)# no power efficient-ethernet
auto
Step 5 end
Example:
Switch(config-if)# end
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Monitoring EEE

Table 12: Commands for Displaying EEE Settings
Command
show eee capabilities interface interface-id
show eee status interface interface-id
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Specifies the interface to be configured, and enter
interface configuration mode.
Enables EEE on the specified interface. When EEE is
enabled, the device advertises and autonegotiates EEE
to its link partner.
Disables EEE on the specified interface.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
Purpose
Displays EEE capabilities for the specified interface.
Displays EEE status information for the specified interface.
Monitoring EEE
109