Configuring Igmp Profiles - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 8
end
Example:
Switch(config)# end
Step 9 Use one of the following:
• show mvr
• show mvr interface
• show mvr members
Example:
Switch# show mvr interface
Port Type
Immediate Leave
---- ----
---------------
Gi1/0/2 RECEIVER
ENABLED
Step 10 copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Configuring IGMP Profiles

Follow these steps to create an IGMP profile:
This task is optional.
Purpose
Returns to privileged EXEC mode.
Verifies the configuration.
Status
-------
ACTIVE/DOWN
(Optional) Saves your entries in the configuration file.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure IGMP Snooping and MVR
151