Tacacs Av Pairs - Cisco Catalyst 2960 series Configuration Manual

Information About TACACS+

TACACS AV Pairs

The network access server implements TACACS+ authorization and accounting functions by transmitting
and receiving TACACS+ attribute-value (AV) pairs for each user session.
TACACS Authentication and Authorization AV Pairs
The following table lists and describes the supported TACACS+ authentication and authorization AV pairs
and specifies the Cisco IOS release in which they are implemented.
Table 86: Supported TACACS+ Authentication and Authorization AV Pairs
Attribute Description
acl=x ASCII
number
representing
a connection
access list.
Used only
when
service=shell.
addr=x A network
address.
Used with
service=slip,
service=ppp,
and
protocol=ip.
Contains the
IP address
that the
remote host
should use
when
connecting
via SLIP or
PPP/IP. For
example,
addr=10.2.3.4.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
780
11.0 11.1
yes yes
yes yes
11.2 11.3
yes yes
yes yes
12.0 12.1
yes yes
yes yes
12.2
yes
yes