Configuring Aaa Broadcast Accounting - Cisco Catalyst 2960 series Configuration Manual

How to Configure Accounting

Configuring AAA Broadcast Accounting

To configure AAA broadcast accounting, use the aaa accounting command in global configuration mode:
Command
Device(config)#
network
default
{
none
Configuring Per-DNIS AAA Broadcast Accounting
To configure AAA broadcast accounting per DNIS, use the aaa dnis map accounting networkcommand in
global configuration mode:
Command
Device(config)#
accounting network
none
Configuring AAA Session MIB
The following tasks must be performed before configuring the AAA session MIB feature:
• Configure SNMP.
• Configure AAA.
• Define the RADIUS or TACACS+ server characteristics.
Note Overusing SNMP can affect the overall system performance; therefore, normal network management
performance must be considered when this feature is used.
To configure AAA session MIB, use the following command in global configuration mode
SUMMARY STEPS
1. Device (config)# aaa session-mib disconnect
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1024
aaa accounting
exec connection
| | |
list-name start-stop
| } {
broadcast method1
} [ ] [
aaa dnis map dnis-number
start-stop
[
method1 method2
broadcast
] [ ] [
Purpose
Enables sending accounting records to multiple AAA
system
{ |
servers. Simultaneously sends accounting records to
commands level
}
the first server in each group. If the first server is
stop-only
| |
unavailable, failover occurs using the backup servers
method2
...]
defined within that group.
Purpose
Allows per-DNIS accounting configuration. This
command has precedence over the global aaa
stop-only
| |
accounting command.
...]
Enables sending accounting records to multiple AAA
servers. Simultaneously sends accounting records to
the first server in each group. If the first server is
unavailable, failover occurs using the backup servers
defined within that group.