Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure IGMP Snooping and MVR
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 ip igmp snooping vlan vlan-id immediate-leave
Example:
Switch(config)# ip igmp snooping vlan 21
immediate-leave
Step 4 end
Example:
Switch(config)# end
Step 5
show ip igmp snooping vlan vlan-id
Example:
Switch# show ip igmp snooping vlan 21
Step 6
end
Example:
Switch(config)# end
Related Topics
Immediate Leave , on page 121
Example: Enabling IGMP Immediate Leave, on page 162

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

136
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Enables IGMP Immediate Leave on the VLAN interface.
Note To disable IGMP Immediate Leave on a VLAN, use
the no ip igmp snooping vlan vlan-id
immediate-leave global configuration command.
Returns to privileged EXEC mode.
Verifies that Immediate Leave is enabled on the VLAN
interface.
Returns to privileged EXEC mode.