Configuring Dom Logging; Cisco Nexus 3548 Switch Nx-Os System Management Configuration Guide, Release; Enabling Dom Logging - Cisco Nexus 3548 Configuration Manual

Configuring System Message Logging
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
The following example shows how to display messages in a log file:
switch# show logging last 40
switch# show logging logfile start-time 2007 nov 1 15:10:0
switch# show logging nvram last 10
The following example shows how to clear messages in a log file:
switch# clear logging logfile
switch# clear logging nvram

Configuring DOM Logging

Enabling DOM Logging

Procedure
Step 1
Step 2
Command or Action
switch# show logging last
number-lines
switch# show logging logfile
[start-time yyyy mmm dd hh:mm:ss]
[end-time yyyy mmm dd hh:mm:ss]
switch# show logging nvram [last
number-lines]
switch# clear logging logfile
switch# clear logging nvram
Command or Action
switch# configure terminal
switch(config)# system ethernet dom
polling
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
Purpose
Displays the last number of lines in the logging file. You
can specify from 1 to 9999 for the last number of lines.
Displays the messages in the log file that have a time
stamp within the span entered. If you do not enter an end
time, the current time is used. You enter three characters
for the month time field and digits for the year and day
time fields.
Displays the messages in the NVRAM. To limit the
number of lines displayed, you can enter the last number
of lines to display. You can specify from 1 to 100 for the
last number of lines.
Clears the contents of the log file.
Clears the logged messages in NVRAM.
Purpose
Enters global configuration mode.
Enables transceiver digital optical monitoring
periodic polling.

Configuring DOM Logging

79