DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
nmsp notification interval {attachment | location}
interval-seconds
Example:
Switch(config)# nmsp notification interval
location 10
Step 4
end
Example:
Switch(config)# end
Step 5
show network-policy profile
Example:
Switch# show network-policy profile
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure LLDP, LLDP-MED, and Wired Location Service
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters global configuration mode.
Specifies the NMSP notification interval.
attachment—Specifies the attachment notification interval.
location—Specifies the location notification interval.
interval-seconds—Duration in seconds before the switch sends
the MSE the location or attachment updates. The range is 1
to 30; the default is 30.
Returns to privileged EXEC mode.
Verifies the configuration.
(Optional) Saves your entries in the configuration file.
73