Configuring Lacp Port Channel Min-Links: Examples - Cisco Catalyst 2960 series Configuration Manual

Group Port-channel
------+-------------+-----------+-----------------------------------------------
1 Po1(SU)
Related Topics
Configuring Auto-LAG Globally, on page 355
Auto-LAG, on page 341
Auto-LAG Configuration Guidelines, on page 342
Configuring Persistence with Auto-LAG, on page 357
Configuring Auto-LAG on a Port Interface, on page 356

Configuring LACP Port Channel Min-Links: Examples

This example shows how to configure LACP port-channel min-links:
switch > enable
switch# configure terminal
switch(config)# interface port-channel 25
switch(config-if)# port-channel min-links 3
switch#
switch# end
When the minimum links requirement is not met in standalone switches, the port-channel is flagged and
assigned SM/SN or RM/RN state.
switch# show etherchannel 25 summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use N- not in use, no aggregration
f - failed to allocate aggregator
M - not in use, no aggregation due to minimum links not met
m- not in use, port not aggregated due to minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 125
Number of aggregators: 125
Group
------+-------------+-----------+-----------------------------------------------
25
Related Topics
Configuring the LACP Port Channel Min-Links Feature , on page 352
Configuring LACP Fast Rate Timer: Examples
This example shows you how to configure the LACP rate:
switch > enable
switch# configure terminal
switch(config)# interface gigabitEthernet 2/1
switch(config-if)# lacp rate fast
switch(config-if)# exit
switch(config)# end
Protocol
LACP
show etherchannel 25 summary
Port-channel Protocol
Po25(RM) LACP
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Configuration Examples for Configuring EtherChannels
Ports
Gi1/0/45(P) Gi2/0/21(P) Gi3/0/21(P)
Ports
Gi1/3/1(D) Gi1/3/2(D) Gi2/2/25(D) Gi2/2/26(W)
361