Configuring Location Tlv And Wired Location Service - Cisco Catalyst 2960 series Configuration Manual

How to Configure LLDP, LLDP-MED, and Wired Location Service

Configuring Location TLV and Wired Location Service

Beginning in privileged EXEC mode, follow these steps to configure location information for an endpoint
and to apply it to an interface.
SUMMARY STEPS
1. configure terminal
2. location {admin-tag string | civic-location identifier {id | host} | elin-location string identifier id |
custom-location identifier {id | host} | geo-location identifier {id | host}}
3. exit
4. interface interface-id
5. location {additional-location-information word | civic-location-id {id | host} | elin-location-id id |
custom-location-id {id | host} | geo-location-id {id | host} }
6. end
7. Use one of the following:
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2
location {admin-tag string | civic-location identifier
{id | host} | elin-location string identifier id |
custom-location identifier {id | host} | geo-location
identifier {id | host}}
Example:
Switch(config)# location civic-location
identifier 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
70
• show location admin-tag string
• show location civic-location identifier id
• show location elin-location identifier id
Purpose
Enters global configuration mode.
Specifies the location information for an endpoint.
• admin-tag—Specifies an administrative tag or site
information.
• civic-location—Specifies civic location information.
• elin-location—Specifies emergency location information
(ELIN).
• custom-location—Specifies custom location information.