Starting Radius Accounting - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
end
Example:
Switch(config)# end
Step 6 show running-config
Example:
Switch# show running-config
Step 7 copy running-config startup-config
Example:
Switch# copy running-config startup-config
What to Do Next
You can use the aaa authorization global configuration command with the radius keyword to set parameters
that restrict a user's network access to privileged EXEC mode.
The aaa authorization exec radius local command sets these authorization parameters:
• Use RADIUS for privileged EXEC access authorization if authentication was performed by using
• Use the local database if authentication was not performed by using RADIUS.

Starting RADIUS Accounting

Follow these steps to start RADIUS accounting:
SUMMARY STEPS
1. enable
2. configure terminal
3. aaa accounting network start-stop radius
4. aaa accounting exec start-stop radius
5. end
6. show running-config
7. copy running-config startup-config
RADIUS.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
How to Configure RADIUS
933