Configuring A Static Vlt Proxy Gateway - Dell S4048T Configuration Manual

Configuring a Static VLT Proxy Gateway

You can configure a proxy gateway in VLT domains. A proxy gateway allows you to locally route the packets
that are destined to an L3 endpoint of the other VLT domain.
Apply the following configurations in the Core L3 Routers C and D in local VLT domain and C1 and D1 in the
remote VLT domain:
1 Configure proxy-gateway static in VLT Domain Configuration mode.
2 Configure remote-mac-address <mac-address> in VLT Domain Proxy Gateway LLDP mode.
Configure the system mac-addresses of both C and D in C1 and also in D1 in the remote VLT domain
and vice versa.
Sample Static Configuration on C switch or C1 switch
Switch_C#conf
Switch_C(conf)#vlt domain 1
Switch_C(conf-vlt-domain1)#proxy-gateway static
Switch_C(conf-vlt-domain1-pxy-gw-static)#remote-mac-address <xx:xx:xx:xx:xx:xx>....
VLT Proxy Gateway 1113