7.2.3 Unit disassembly
In the following figures is shown an example of unit.
The same rules can be applied to the specific units to be dismantled.
Procedure:
–
Remove the two screws (A) from the side coverplate as indicated in Figure 127. on page 220.
A
A
–
Remove the screws (B) that fix the two levers and subsequently pull out them from the front plate
as indicated in Figure 128. on page 221.
–
Remove the front plate from the PCB (refer to Figure 128. on page 221)
–
Extract from the top the contact spring (C) as indicated in Figure 128. on page 221 (refer to paragraph
7.2.4 on page 223 for info about hazardous parts dismantling).
Alcatel 1850 TSS-320 Rel. 1.1
220/270
8DG 07734 AAAA Edition 01
Figure 127. Side coverplate removal
Technical Handbook Common
Dismantling & Recycling